Fibreplex No.1 and No.2 Explained: Bond Care for Coloured and Lightened Hair

Every time hair is lightened or coloured, its structure is put under pressure. Over a few services, that pressure can show up as breakage, rough texture and hair that stretches and snaps. Bond care exists to deal with that, and one of the best-known systems is Fibreplex. The Schwarzkopf Fibreplex No.1 Bond Booster and the Fibreplex No.2 Bond Sealer are designed to work as a pair.

This guide explains what each step does, when to use it and what to expect.

Why Bonds Matter

Hair is mostly made of keratin, a protein arranged in long chains. Those chains are held together by bonds, which give the hair strength and elasticity. Chemical services such as lightening and colouring disturb some of those bonds. When enough of them break, hair feels weak, stretches too much and snaps more easily.

The idea behind bond care is to protect those bonds during the service and then support them afterwards.

Step One: Fibreplex No.1 Bond Booster

No.1 is a concentrated additive that you mix directly into a lightening, lifting or colouring system. According to Schwarzkopf, it is powered by Fibre Bond 4.5 Technology, which interlinks with the hair fibre to enforce strong structural bonds. The brand states that it reduces hair breakage by up to 94% during the chemical process.

What No.1 Does Not Change

One reason stylists like additives like this is that they do not interfere with the service. The brand states that No.1 does not alter the colour result or require changes to processing time. You mix it in following the Fibreplex mixing table, apply as normal and rinse as normal. It is compatible with any Schwarzkopf Professional lightening, lifting or colour product.

Step Two: Fibreplex No.2 Bond Sealer

After the chemical service is rinsed out, No.2 comes in. It is described as a deeply caring treatment that stabilises the bonds that were enforced by No.1. Where No.1 works during the service, No.2 supports the hair after it. Follow the instructions on the pack for how long to leave it on and how to rinse.

When to Use the System

  • During lightening, balayage or highlights, where hair is under the most stress
  • During colour services that lift several levels
  • On hair that has been through multiple chemical services and is fragile
  • When a client has a history of breakage after colouring

Who Benefits Most

Clients with blonde or bleached hair benefit most, since lightening is the most demanding service. Anyone with fine hair, previously damaged hair or hair that breaks easily is also a good candidate. For virgin hair going a few shades darker, bond care is less critical, though it can still add comfort.

Is Bond Care Magic?

No. It helps protect hair during a service, but it does not turn damaged hair into new hair. It will not replace a haircut if the ends are split, and it will not make an unsafe service safe. Think of it as insurance and support, not a miracle. Aggressive lightening on weak hair is still risky, even with bond protection.

The protein at the centre of all this has a lot of science behind it. According to general information on keratin, it is a family of structural proteins that form the main component of hair, nails and the outer layer of skin, which explains why protecting it matters for hair strength.

Aftercare at Home

Between services, keep supporting the hair. Use a shampoo for coloured or lightened hair, condition every wash and apply a deep mask weekly. Avoid very hot water, limit heat styling and always use a heat protectant. Trim ends regularly so that splits do not travel up the strand.

Safety Notes

Fibreplex is used alongside chemical services that carry their own risks. The brand advises an Allergy Alert Test 48 hours before each chemical service. Follow the manufacturer's mixing table, and do not use it as a reason to push hair further than it can safely go.

Frequently Asked Questions

Do I need both No.1 and No.2? They are designed as a pair, with No.1 used during the service and No.2 after it.

Will it change my colour? The brand states No.1 does not alter the colour result.

Does it affect processing time? No, the brand states no change is needed.

Final Thoughts

If you lighten or colour hair regularly, bond care is one of the smartest additions to a service. Fibreplex No.1 helps protect during the work and No.2 helps seal afterwards. Used sensibly, with realistic expectations, it can help hair stay stronger through the changes you want to make.

Disclaimer

This article is for general informational purposes only. Bond care products do not guarantee protection from damage. Chemical services should be done by trained professionals following manufacturer instructions. Results vary and are not guaranteed. If you experience irritation, please stop use and consult a doctor.

Bond care, Damage repair, Fibreplex, Hair treatment, Schwarzkopf

Read On: